![]() ![]() As you can see, we have a belt looping around here and we have our belt clip that sits in the middle now. You know the specs for these guys and how to connect everything a little bit of background on how to use the stepper motors now that we’re going to do this today. I believe and they’re rated at point 4 amps, so 400 milliamps and, like I always say, go to our website you’ll see the schematic. These Nimmo motors consume, while they can work from 12 volt to 36 volts. It has only four wires connected to it, and the power is provided by our 12 volt power supply. This is connected fairly easily to our uno right here and we got the EZ driver that is connected to the motor. So the way we’re gon na do this today, we’re gon na use an analog joystick like I said so. So all these parts are gon na be available in our star very soon and we’re just doing this, because these parts are hard to find and instead of importing them and all that, since we have the tools here, we’d rather, you know cut them ourselves and customize Them and stuff like that, and you know, help you guys out finding the right parts to do your project, alright enough of that. That’S also for a NEMA 17 motor, but it all it also can be used for putting idler, pulleys and stuff. So you guys can grab a couple of those if you want, if you’re buying a couple of parts grab a couple of those, and you can do projects like this very easily and as you can see also, we have brackets here that are cut out of acrylic, Because we have a laser cutter in our shop and we’re gon na start cutting little parts like this and offer those also because these are very useful, because we have a bracket here for a NEMA 17 motor and we have another type of bracket here. ![]() Another part that is very useful when you’re playing around with motors, so we’re gon na offer these parts in our store from now on. So basically you take your belt, you put it on top of each other, and then you slide this little clip on and it holds your belt in place and we’re also using a true another treaty printed part and idler pulley, and we print those – and we put A 624 bearing in it and it works very good, it’s, very strong and that’s. Because treaty parts tend to be, you know not the best looking parts but for some parts treaty printing it can be very useful what we’re, using today as treaty parts in this little project here, as you can see, we have a belt clip. Now you might hear on the background we’re treaty printing, some parts right now in our shop and I’m, mentioning that because we’re using some treaty parts right now and weren’t sure if we wanted to offer those inside of our store at brainy bits. The very popular and easy to use and cheap easy driver module to actually drive the stepper motor. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |